Husky 28WC01BP-THD Manual de instrucciones descargar pdf (Pagina 6)

SQUARE CABINET

Items Needed:

Socket Wrench PP - 5/32-in Hex Key

7/16-in Deep-well Socket Square

Process:

• Square the cabinet and wrench tighten all bolts.

NOTE: be sure all hardware is fully seated

before tightening.

• Attach the LL and NN hinges to the doors using (8) EE

(8) FF and (8) GG.

• Wrench Tighten.

DOOR CONSTRUCTION

Items Needed:

GG - #10-24 Hex Nut (Qty: 8) FF - 3/16-in Washer (Qty: 8)

MM - Lower Hinge Pin (Qty: 2) 3/8-in Deep-Well Socket

EE - #10-24 Carriage Bolt (Qty: 8) LL - Upper Hinge Pin (Qty: 2)

Socket Wrench

Process:

• Make sure to insert Hinge Pins through slots.

LL - Door E

MM - Door F

MM - Door E

LL - Door F

Figure 7

Figure 8

Figure 8.1

Note: The hinges for both Doors MUST be mounted so the

Hinge Pin points UP at the TOP of the door and DOWN at

the BOTTOM of the door.

DOOR HINGE ATTACHMENT

Items Needed:

AA - 1/4-20 x 5/8-in Carriage Bolt (Qty: 4)

CC - 5/16-in Washer (Qty: 4)

DD - 1/4-20 Serrated ange Nut (Qty: 4)

NN - Unit Hinge (Qty: 2)

7/16-in Deep Well Socket

Process:

• Slide the left door hinge pin MM into the left lower hinge

NN. (See Figure 9., lower left detail).

• Slide the hinge plate NN onto the upper door hinge

pin LL. (Figure 9.1)

• Attach the left door E as shown, by mounting the upper

hinge NN, using (2) AA, (2) CC and (2) DD.

• Attach the right door F in the same manner.

Figure 9

Figure 9.1

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios

Husky 28WC01BP-THD Manual de instrucciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para No Husky 28WC01BP-THD